Efficient Adsorption and Removal of the Herbicide 2,4-Dichlorophenylacetic Acid from Aqueous Solutions Using MIL-88(Fe)-NH2.

Metal-organic frameworks (MOFs), a material known for its multifunctionality, chemical stability, and high surface area, are now commonly utilized as an adsorbent for water treatment. The MOF (MIL-88(Fe)-NH2) was synthesized and used to remove the commonly used toxic herbicide 2,4-dichlorophenoxyacetic acid (2,4-D) from water. The MIL-88(Fe)-NH2 MOF was fully characterized using multiple techniques. A systematic investigation was conducted to evaluate the key parameters that impact the adsorption process, which include coexisting anions, adsorbent dosage, and solution pH. The adsorption isotherm was fitted using the Langmuir model, while the kinetics were fitted using pseudo-second-order. The adsorption process was both chemisorption and endothermic. The capacity for adsorption increased with rising temperatures. The MIL-88(Fe)-NH2 adsorbent has a maximum adsorption capacity of 345.25 mg g-1 for removing 2,4-D, significantly higher than previous adsorbents used for this purpose. The adsorption mechanism could be ascribed to hydrogen bonding, pore filling, π-π conjugations between the 2,4-D molecules and the MIL-88(Fe)-NH2 adsorbent, and electrostatic interactions. Furthermore, the adsorption capacity of MIL-88(Fe)-NH2 adsorbent showed only a slight decrease after five successive recycles, and it could be easily regenerated through solvent washing. When used in environmental water samples, especially those containing electronic wastes, the MIL-88(Fe)-NH2 adsorbent demonstrated satisfactory adsorption capacity and reusability. The MIL-88(Fe)-NH2 adsorbent is more practical and reusable and has better adsorption capacity and shorter equilibrium time compared to previously reported adsorbents.

Preparation of green colorimetric pH sensor using Humulus lupulus L. (common hop) biomolecular extract for sweat monitoring.

Novel smart cotton diagnostic assay was developed toward onsite sensing of sweat pH variations for possible medical applications such as drug test and healthcare purposes. Humulus lupulus L. extract was obtained according to previously reported procedure. As reported by high-performance liquid chromatography (HPLC), the extract demonstrated the presence of hop acids, prenylchalcones, and prenylflavanones, which is responsible for the colorimetric changes. The extract was applied to cellulose fibers employing potassium aluminum sulfate as mordant. This was observed by the formation of mordant/xanthohumol nanoparticles onto cotton surface. The absorption spectra and CIE (Commission Internationale de l'Eclairage) Lab screening of the prepared cotton assay showed colorimetric changes in association with hypsochromic shift from 600 nm to 433 nm upon exposure to sweat simulant fluid (pH < 7). The biochromic activity of the xanthohumol-finished cotton depends mainly on the halochromic performance of the xanthohumol chromophore to show a colorimetric switch from yellow to white owing to intramolecular charge transfer in the xanthohumol molecule. No substantial defects were detected in gas-permeability and stiffness of the treated fabrics. Satisfactory fastness was approved for the xanthohumol-dyed diagnostic cotton assay.

Preparation of Lighting in the Dark and Photochromic Electrospun Glass Nanofiber-Reinforced Epoxy Nanocomposites Immobilized with Alkaline Earth Aluminates.

Alkaline earth aluminates (AEAs) as photoluminescent agents and silicon dioxide-based electrospun glass nanofibers with an average diameter of 150-450 nm as a roughening agent were prepared and applied to reinforce an epoxy resin toward the development of long-persistent photoluminescent and photochromic smart materials, such as smart windows and anticounterfeiting barcodes. With the physical immobilization of lanthanide-doped aluminate nanoparticles (NPs), a light-induced luminescent transparent glass@epoxy film was developed. The glass@epoxy samples were able to alter their color to green beneath ultraviolet rays and greenish-yellow in the dark, as explored by CIE Lab and luminescence spectral analyses. The morphology of the lanthanide-doped aluminate nanoparticles (43-98 nm) was examined by transmission electron microscopy (TEM). The morphologies and chemical composition of the luminescent glass@epoxy substrates were determined by different analytical techniques. The mechanical properties of the developed photoluminescent glass@epoxy substrates were inspected to show improved scratch resistance as compared to the AEA-free substrate. The photoluminescence spectra were measured to indicate the detection of two emission bands at 494 and 525 nm when excited at 365 nm. The photoluminescent glass@epoxy hybrids with lower AEA contents have showed fast reversibility of photochromism. On the other hand, the glass@epoxy substrates with higher phosphor contents underwent persistent luminescence. Results showed that the luminescent colorless glass@epoxy hybrids have enhanced superhydrophobicity and ultraviolet blocking.

A Novel Triazole Schiff Base Derivatives for Remediation of Chromium Contamination from Tannery Waste Water.

Tannery industries are one of the extensive industrial activities which are the major source of chromium contamination in the environment. Chromium contamination has been an increasing threat to the environment and human health. Therefore, the removal of chromium ions is necessary to save human society. This study is oriented toward the preparation of a new triazole Schiff base derivatives for the remediation of chromium ions. 4,4'-((1E)-1,2-bis ((1H-1,2,4-triazol-3-yl) imino)ethane-1,2-diyl) diphenol was prepared by the interaction between 3-Amino-1H-1,2,4-triazole and 4,4'-Dihydroxybenzil. Then, the produced Schiff base underwent a phosphorylation reaction to produce the adsorbent (TIHP), which confirmed its structure via the different tools FTIR, TGA, 1HNMR, 13CNMR, GC-MS, and Phosphorus-31 nuclear magnetic resonance (31P-NMR). The newly synthesized adsorbent (TIHP) was used to remove chromium oxyanions (Cr(VI)) from an aqueous solution. The batch technique was used to test many controlling factors, including the pH of the working aqueous solution, the amount of adsorbent dose, the initial concentration of Cr(VI), the interaction time, and the temperature. The desorption behaviour of Cr(VI) changes when it is exposed to the suggested foreign ions. The maximum adsorption capacity for Cr(VI) adsorption on the new adsorbent was 307.07 mg/g at room temperature. Freundlich's isotherm model fits the adsorption isotherms perfectly. The kinetic results were well-constrained by the pseudo-second-order equation. The thermodynamic studies establish that the adsorption type was exothermic and naturally spontaneous.

Development of photoluminescent artificial nacre-like nanocomposite from polyester resin and graphene oxide.

Long-lasting phosphorescent nacre-like material was simply prepared from a nanocomposite of inorganic and organic materials. Low molecular weight unsaturated polyester (PET), graphene oxide (GO), and nanoparticles of rare-earth activated aluminate pigment were used in the preparation process of an organic/inorganic hybrid nanocomposite. Using methylethylketone peroxide (MEKP) as a hardener, we were able to develop a fluid solution that hardens within minutes at room temperature. Covalent and hydrogen bonds were introduced between the polyester resin and graphene oxide nanosheets. The interface interactions of those bonds resulted in toughness, excellent tensile strength, and high durability. The produced nacre substrates demonstrated long-persistent and reversible luminescence. The excitation of the produced nacre substrates at 365 nm resulted in a 524 nm emission. After being exposed to UV light, the photoluminescent nacre substrates became green. The increased superhydrophobic activity of the produced nacre substrates was achieved without affecting their physico-mechanical properties. HIGHLIGHTS: Colorless photoluminescent smart nacre-like nanocomposites were prepared. Graphene oxide and polyester were mixed with phosphor nanoparticles at 25°C. Photostable long-persistent phosphorescence lighting was observed in the dark. Photochromic change to green emission was detected under ultraviolet light. The nacre-like composites exhibit improved hardness and hydrophobicity.

Development of a Fluorescent Nanofibrous Template by In Situ SNAr Polymerization of Fluorine-Containing Terphenyls with Aliphatic Diols: Self-Assembly and Optical and Liquid Crystal Properties.

Stimulus-responsive supramolecular organogels have been broadly studied, but the assembly of a liquid crystalline organogel with a thermoreversible response remains a challenge. This could be attributed to the difficulty of designing organogelators with liquid crystalline properties. Nucleophilic aromatic substitution (SNAr) has been utilized to produce a diversity of pentafluorobenzene-containing aromatics, which are very regioselective to para positions. Those pentafluorobenzene-functionalized aromatics have been ideal compounds for the preparation of calamitic liquid crystals. In this context, novel fluoroterphenyl-containing main-chain polyether (FTP@PE) was synthesized using in situ SNAr polymerization as a convenient and effective synthetic strategy toward the development of fluorescent liquid crystals bearing fluoroterphenyl and ether groups. The fluoroterphenyl unit was synthesized by Cu(I)-supported decarboxylation cross-coupling of potassium pentafluorobenzoate and 1,4-diiodobenzene. The chemical structures of FTP@PE were studied with 1H/13C/19F nuclear magnetic resonance and infrared spectra. The liquid crystal mesophases were determined with differential scanning calorimetry and polarizing optical microscopy. Ultraviolet-visible absorbance and emission spectral profiles showed solvatochromic activity. The nanofibrous morphologies were studied with a scanning electron microscope. The organogels of FTP@PE were developed in a number of solvents via van der Waals attraction forces of aliphatic moieties and π stacking of fluoroterphenyl groups. They demonstrated thermoreversible responsiveness.